CARBONX™ Carbon Fiber PC/ABS Filament - Black various sizes

CarbonX™ Carbon Fiber Reinforced PC/ABS Filament

CarbonX™ CF-PC/ABS has been formulated to offer improved thermal resistance and mechanical properties while retaining an ease of printability that makes it ideal for anyone seeking a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability. 

Print industrial-grade Carbon Fiber PC/ABS parts with Gearbox™ HT2 High-Temp 3D Printer. 

Recommended Print Conditions:

• Extruder:  280-300°C
• Bed Temp:  100-120°C
• Bed Prep:  PEI Sheet or tape, Kapton/PI Tape, Glue stick on clean glass, ABS/Acetone Slurry
• Nozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzle
• Layer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.

No reviews yet.