{"product_id":"bambu-lab-h2c-induction-hotend-right","title":"Bambu Lab H2C Induction Hotend (Right)","description":"\u003ch1 class=\"pct_t\" style=\"text-align: center;\"\u003eMulti-Material Printing with Less Waste\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\" class=\"pct_p\"\u003eThe Vortek System uses up to six interchangeable induction-heated hotends to achieve true multi-material printing with significantly reduced purge waste compared to single-nozzle systems. The hotend swap mechanism eliminates purge flushing during filament changes (H2C under 7 filaments), saving both material and time.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" class=\"pct_p\"\u003e\u003cimg alt=\"vision encoder\" src=\"https:\/\/store.bblcdn.com\/s1\/default\/93f0abc19b434a9abc574950f813f87c\/1-PC.jpg\"\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_st\"\u003eFast and Precise Induction Heating\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eThe Vortek Induction Hotend rapidly heats the nozzle to printing temperature in approximately 8 seconds (PLA). This fast response shortens color-change transitions and further reduces purge waste. Integrated overheat, overvoltage, short-circuit, and open-circuit protection ensure reliable performance during continuous multi-material workflows.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" class=\"pct_p\"\u003e\u003cvideo style=\"width: 100%; max-width: 800px;\" playsinline=\"\" muted=\"\" loop=\"loop\" autoplay=\"autoplay\" controls=\"controls\"\u003e\n  \u003csource type=\"video\/mp4\" src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/226e05faff7f4fbeaeabfba483cb251a.mp4\"\u003e\n  Your browser does not support the video tag.\n\u003c\/source\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_st\"\u003eReliable Contactless Connection\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eInstead of contact-based metal pins—which can oxidize and degrade over time—the Vortek System employs a contactless, high-frequency power and signal interface. This delivers a stable, long-lasting connection for accurate temperature control and synchronized hotend operation.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cimg src=\"https:\/\/store.bblcdn.com\/s1\/default\/8ff939c51e8f447eae3a7c93bb5a4a9a\/3-PC.jpg\" alt=\"图片加载失败文案\"\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_st\"\u003eHeatsink Overheat Monitoring\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eDual temperature sensors monitor both nozzle and heatsink temperatures in real time. When heatsink temperature exceeds safe limits, the system automatically increases cooling to prevent heat creep and reduce the risk of clogging.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cimg src=\"https:\/\/store.bblcdn.com\/s7\/default\/5ff29d01dfa94731a8a3d3e012a49d20\/Frame_47901_(2).jpg\" alt=\"图片加载失败文案\"\u003e\u003c\/p\u003e\n\u003ch2 class=\"pct_t\" style=\"text-align: center;\"\u003e\u003cspan\u003eIntelligent Multi-Hotend Management\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"pct_p\"\u003eEach Vortek Hotend stores its filament information locally, ensuring correct material mapping and preventing loading errors. When printing with more than seven filament types, the system intelligently optimizes hotend mapping to minimize purge waste and improve overall efficiency.\u003c\/p\u003e\n\u003cp class=\"pct_p\"\u003e\u003cvideo controls=\"controls\" autoplay=\"autoplay\" loop=\"loop\" muted=\"\" playsinline=\"\" style=\"width: 100%; max-width: 800px;\"\u003e\n  \u003csource src=\"https:\/\/cdn.shopify.com\/videos\/c\/o\/v\/90e611e6c52f4a759f1eb60b494fe6e3.mp4\" type=\"video\/mp4\"\u003e\n  Your browser does not support the video tag.\n\u003c\/source\u003e\u003c\/video\u003e \u003c\/p\u003e\n\u003cdiv class=\"pct_t-p\"\u003e\n\u003ch2 class=\"pct_t\"\u003e\u003cspan\u003eReal High-Flow, Real Time Saved\u003c\/span\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003cthead class=\"pct_th\"\u003e\n\u003ctr\u003e\n\u003ctd class=\"pct_td\"\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003eH2C Max Volumetric Speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eInduction Stainless Steel Nozzle (0.2mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e2 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eInduction Hardened Steel Nozzle (0.4mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e25 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eInduction Hardened Steel Nozzle (0.6mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e30 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eInduction Hardened Steel Nozzle (0.8mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e30 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHigh Flow Induction Hardened Steel Nozzle (0.4mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003e40 mm³\/s\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHigh Flow Induction Hardened Steel Nozzle (0.6mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003e40 mm³\/s\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003eHigh Flow Induction Hardened Steel Nozzle (0.8mm)\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003e40 mm³\/s\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"pct_p\"\u003e\u003cspan\u003e\u003cem\u003e*Tested with Bambu PLA Basic.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"pct_st\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp class=\"pct_p\"\u003eH2C and H2C Laser\u003c\/p\u003e\n\u003cdiv class=\"pct pct_mc\"\u003e\n\u003cdiv class=\"pct_st-tbc\"\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003ch4 class=\"pct_t\"\u003eFilament Compatibility\u003c\/h4\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/acrobat.adobe.com\/id\/urn:aaid:sc:US:684d1206-6920-46d0-a0ec-1a096d1363cd\" rel=\"noopener\" target=\"_blank\"\u003eClick here to view the filament compatibility\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eLearn more about filament compatibility on\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/wiki.bambulab.com\/en\/general\/filament-guide-material-table\" rel=\"noopener\" target=\"_blank\"\u003eBambu Lab Wiki\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e1. If you print only single-color filament, we recommend using the Fixed Hotend (Induction Hotend) for printing.\u003cbr\u003e2. If you need multi-color printing with the AMS, connect the AMS to the right-side Fixed Hotend.\u003cbr\u003e3. If you want to use the second hotend for support-material printing, we recommend using the Liftable Hotend.\u003cbr\u003e4. TPU85A is only supported on the right-side Fixed Hotend. TPU95AHF\/90A is expected to be supported on the left-side Liftable Hotend starting from firmware version U2.\u003cbr\u003e5. PET-CF \/ PPA-CF \/ PPS-CF are supported only on the left-side Liftable Hotend.\u003cbr\u003e6. CF\/GF-reinforced filaments are not compatible with stainless steel nozzles.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 class=\"pct_t\"\u003eProduct Specifications\u003c\/h4\u003e\n\u003cdiv class=\"pct_tbc\"\u003e\n\u003ctable class=\"pct_tb\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eMax. Printing Temp.\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e350 ℃\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003eLength\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e56.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"pct_tr\"\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackaging Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cspan\u003e0.015 kg\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e\u003cstrong\u003ePackaging Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"pct_td\"\u003e60*60*30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Bambu Lab","offers":[{"title":"Stainless Steel Nozzle 0.2mm","offer_id":47298254930150,"sku":"FAH050","price":51.99,"currency_code":"CAD","in_stock":true},{"title":"Hardened Steel Nozzle 0.4mm","offer_id":47298254831846,"sku":"FAH051","price":51.99,"currency_code":"CAD","in_stock":true},{"title":"Hardened Steel Nozzle 0.6mm","offer_id":47298254864614,"sku":"FAH052","price":51.99,"currency_code":"CAD","in_stock":true},{"title":"Hardened Steel Nozzle 0.8mm","offer_id":47298254897382,"sku":"FAH053","price":51.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/FAH050.png?v=1769526197","url":"https:\/\/esun3dstorehype.com\/products\/bambu-lab-h2c-induction-hotend-right","provider":"Digitmakers.ca","version":"1.0","type":"link"}