{"product_id":"esun-hard-tough-resin-abs-like-for-lcd-printer-500g-various-colors","title":"ESUN Hard-Tough Resin ABS Like For LCD Printer 500g - various colors","description":"\u003cdiv style=\"text-align: start;\"\u003e\n\u003cp style=\"font-weight: 400;\"\u003eThis is a resin with high physical strength, high hardness and high toughness similar to ABS filament. Experiments have shown that the 3D model produced by eSUN's Hard-Tough Resin product, such as the carrier gear, can withstand high impact forces and other high-strength mechanical pressures. While using electric drills to test the toughness of the resin, there's no breakage on the model even after a few drills. For the application field, the material needs to have extremely high stress and strain performance, and that's why eSUN developed Hard-Tough Resin.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eHard-Tough Resin is a urethane acrylate photocurable resin suitable for LCD printers. To ensure the good quality and stability, eSUN is fully formulated with high quality imported raw materials with the following advantages:\u003c\/p\u003e\n\u003col\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHigh impact strength;\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHigher shock resistance than normal resin;\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eRigid resin, excellent mechanical properties such as hardness, tensile and bending;\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003eHigh surface hardness and wear resistance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/7981a4b20c034564bb040e4ee2028673_480x480.jpg?v=1595532237\" width=\"480x480\" height=\"480x480\" style=\"margin-right: -66px; float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/files\/11790219b5064f2c9fee4001716dc0db_480x480.jpg?v=1595532468\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePrint Setting:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eApplicable wavelength: 395-405nm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOperating temperature: 18-35 ° C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eExposure time: 20-30s on the bottom layer, 8s on the normal layer\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePls adjust the setting until you get the best print performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eInstructions for use:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e(1) Before use:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003eShake the liquid resin before use;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePls wear gloves and stay in ventilated environment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e(2) When using:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUnscrew the cap and add it to the resin tank according to the equipment requirements;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSelect the correct print parameters and settings for printing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e(3) After use:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter printing, please use the matching tools for post-processing, including blade, diagonal pliers, tweezers, containers, gloves; ethanol (≥95%), lactate or isopropyl alcohol cleaning solution; high pressure mercury lamp or LED lamp (launch peak is between 360-405 nm); oven.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e(4) Post-processing steps:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA. Remove the printed model from the molding platform with a blade;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eB, Submerge the model in the cleaning solution, rinsed or ultrasonically washed for 1 minute, then taken out and drained;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eC. Submerge the model completely in distilled water, uniformly irradiated with high-pressure mercury lamp, LED lamp, or exposed to sunlight;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eD, Place the model in an oven, set to heat at 50℃ for 20 minutes, and then naturally cooled to room temperature;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eE. Proper processing, such as removing support, polishing, coloring, etc.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHard-tough Resin:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"560\" height=\"329\" src=\"https:\/\/www.youtube.com\/embed\/xtaSReXFac8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003ePrecautions:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e1. Seal at room temperature and protect from light to avoid high temperature or sunlight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2, the recommended temperature is 18-35 ° C, a low temperature may affect the printing effect, the resin can be properly preheated before use (not more than 60 ° C).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3. If the resin pigment settles, it can be used after stirring or shaking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4. To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing, so it is recommended that:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(1) The intensity of mercury lamp or LED light source is 5-10mW\/m2, and the duration is no more than 1 hour (self-regulation);\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(2) The exposure time in the sun (summer) is around 1 hour;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003cem\u003eMaterial properties will vary depending on the molding equipment, post-cure method and testing equipment.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"ESUN","offers":[{"title":"White","offer_id":35312923345058,"sku":"ESUN-HRS-500G-WHT","price":44.95,"currency_code":"CAD","in_stock":true},{"title":"Black","offer_id":35312923410594,"sku":"ESUN-HRS-500G-BLK","price":44.95,"currency_code":"CAD","in_stock":true},{"title":"Blue","offer_id":35312923574434,"sku":"ESUN-HRS-500G-BLU","price":44.95,"currency_code":"CAD","in_stock":true},{"title":"Grey","offer_id":37441236664482,"sku":"ESUN-HRS-500G-GRY","price":44.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1745\/6181\/products\/Esun-hard-tough-resin-500g.jpg?v=1609954755","url":"https:\/\/esun3dstorehype.com\/products\/esun-hard-tough-resin-abs-like-for-lcd-printer-500g-various-colors","provider":"Digitmakers.ca","version":"1.0","type":"link"}